News

By the Engineering Team at FUHONG Injection Molding Machines | Updated August 2026 When an appliance manufacturer evaluates an injection molding machine, the conversation often starts with tonnage and purchase price. Those figures matter, but they do not te...

The most often overlooked factor when choosing a PET injection molding machine is not clamp force or price, but how well the machine matches the full PET process window: resin drying, screw and barrel design, plasticizing stability, preform weight control, mol...

The packaging products best suited for a PET injection molding machine are PET preforms, bottle neck finishes, caps and closures made from PET-compatible resin systems, and other high-clarity packaging components that need dimensional repeatability, low cycle-...

An industrial cooling tower can be one of the most important assets in a 2026 injection molding energy saving plan because it protects cycle time, mold temperature stability, and scrap control at the same time. In a plastic injection molding line, cooling is o...

Why Tonnage Selection Is the First — and Most Consequential — Decision A stackable fruit crate looks simple. In practice, it is one of the more demanding applications in large-part injection molding. The part is big, the wall sections are relati...

An injection molding factory should upgrade to an industrial cooling tower when mold temperature instability starts to affect cycle time, part consistency, scrap rate, or uptime. In practice, the trigger is usually not the machine itself but the plant’s cool...

When buying a 2026 PET injection molding machine for packaging, check the machine’s PET-specific plasticization capacity, preform weight range, clamp force, mold compatibility, drying and dehumidification requirements, energy consumption, control system, and...

A PET injection molding machine meets bottle preform production needs by combining high plasticizing capacity, stable melt temperature control, and precise injection repeatability for thin-wall, high-clarity PET parts. In packaging lines, the machine must deli...

A servo injection molding machine is more energy efficient because its motor only draws substantial power when the hydraulic system actually needs it. In a conventional fixed-speed pump setup, the motor often runs continuously at full speed and wastes energy a...

Why 90% Feels Safe — and Why That Feeling Is Wrong Ask any experienced process engineer what clamping force margin they run on, and the answer is almost always somewhere between 80% and 95% of rated capacity. The logic seems sound: stay below the rate...