FUHONG focus on high-end injection machine technology for plastic moulding machine solution since 2006.

The characteristics of the servo injection molding machine

by:FUHONG     2020-10-09
The characteristics of the servo injection molding machine, compared with the traditional injection molding machine, servo energy-saving injection molding machine is equipped with high-performance servo dynamic variable speed control, the successful implementation of the injection molding machine better matching and automatic adjustment of energy demand, electricity saving effect achieved 30% ~ 80. At the same time, the equipment is also significantly shorten the operation cycle of the system, and improve the productivity and reliability of the equipment, prolong the service life of the equipment. 1. More responsive and has higher precision. The servo motor of the servo energy-saving injection molding machine from static to achieve rated speed only need 30 ms, low flow repeated reproducibility of plus or minus 0. 5%, at the same time avoid the hysteresis of variable frequency motor. Compared with the traditional injection molding machine, the pressure flow speed of response is only 0. 3 s or so, not only can significantly improve the repeat precision, and position precision can reach 0. Less than 1 mm. 2. Molding cycle shorter, more efficient. With servo motor, injection molding machine every action less start and stop the time required, and cancel the proportional valve, reduce the leakage situation of hydraulic speed is faster. 3. Motor power consumption is lower. The efficiency of about 80% compared with the traditional induction motor, the same power of the equipment, the efficiency of the servo motor can reach more than 90%, more energy saving. 4. Traditional motor starts up, the current is 5 times during normal operation, and energy saving injection molding machine adopts the model of soft start, will not cause impact to the grid. 5. Water saving fuel. The system has high efficiency, and can effectively avoid the oil temperature rise, and when the water cooling capacity is reduced, warming to reduce, thereby reducing the GengHuanLv of hydraulic oil. Through to the part of the pipe fittings manufacturer, tracking survey the equipment only for one year in summer is 10 ~ 20 days to need to use the cooling water, and the use of cooling water volume is only 1/3 of the traditional injection molding machine. 6. The noise is lower. Servo energy-saving injection molding machine noise source is mainly the power system, power system composed of servo motor and gear pump noise is very small, because of its working nature itself that is equipped with injection molding machine of the system noise is very small.
If you are sourcing for product development or manufacturing operations, you won't miss FUHONG Injection Machine Co.,Ltd.'s list of offer.
FUHONG Injection Machine Co.,Ltd. is a company that offers reliable products. For customization, nissei injection molding machine and micro injection molding in different styles are also in the offer list. Click FUHONG Injection Machine for more details.
We began investing in our workforce and negotiated deals with major suppliers and providers to lower the cost of equipment so the technicians could enhance the competitiveness of automatic injection moulding machine right away.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: