FUHONG focus on high-end injection machine technology for plastic moulding machine solution since 2006.

Injection molding machine maintenance and maintenance specifications

by:FUHONG     2021-06-07
The injection molding machine is a highly automated modern industrial machine. Its appearance has greatly improved the production efficiency and production quality of the injection molding industry. Injection molding machines are usually in a fully automatic and high-efficiency state of operation, so the consumption of various parts of the machine is relatively large. While enjoying the convenience of injection molding machines, we must also do maintenance work, especially now. In the hot weather, daily maintenance work is even more essential. Specifications for daily maintenance of injection molding machines First of all, we must formulate appropriate daily, monthly and annual maintenance plans according to the machine's own conditions, and carefully implement them in each machine according to the plan. Before using the machine every day, we must first check whether the various parts of the machine are normal, such as whether the mechanical safety lock is working properly, whether the temperature and heating conditions of each section are normal, whether there is water leakage in the cooling water pipe, and whether the emergency stop button can cut off the power of the motor, etc. an examination. After the machine is used for a long time, there will be a lot of stains on the oil filter and air filter. We should clean it up in time. At the same time, we must check whether the installation of the electronic ruler and proximity switch is normal and stable. Whether the barrel is installed firmly, check whether the machine has oil leakage, if there is oil leakage, repair it immediately and check whether there is noise in the bearing assembly of the hydraulic motor. If there is noise, refill the lubricating grease or replace the new bearing. We need to check whether the hydraulic oil needs to be replaced regularly, and take samples of the pressure oil and send it to the laboratory for testing. If the hydraulic oil deteriorates, it must be replaced with new oil; the dust on the surface of the motor fan blades and shells should be cleaned frequently, and new lubricating grease should be injected into the flange bearings; Take out the filter element and blow it clean with compressed air from the inside of the filter element. At the same time, check whether the filter element is damaged. If it is damaged, replace it with a new one; check whether the fixing screws of the safety mechanism are tightened. For more questions about injection molding machines, please click the online customer service button at the top right, and our customer service staff will wholeheartedly ask you to answer.
There is a strong need for more research on , in order to be able to provide strong and conclusive evidence of their nissei injection molding machine effects. However, recent studies have provided valuable insights into how the intake of may result in improved micro injection molding.
You can get a of any specification from FUHONG Injection Machine Co.,Ltd. as we have varied specifications to suit different plastic blow moulding machine needs and cater to a wide client base existing in both domestic and overseas market. please feel free to enquire us at FUHONG Injection Machine.
Lucky to know that you are not alone in the face of rubber injection moulding machine issue. Let FUHONG Injection Machine Co.,Ltd. be your selected automatic injection moulding machine expert in providing first class to help you out.
Our company specializes in selling automatic injection moulding machine as well as providing relevant services.
Custom message
Chat Online
Chat Online
Chat Online inputting...