FUHONG focus on high-end injection machine technology for plastic moulding machine solution since 2006.

High speed injection machine instructions

by:FUHONG     2020-10-04
High-speed injection molding machine is in normal injection molding machine research and development of a high speed and high pressure, at the same time have a high temperature operation of injection molding machine, high-speed use may occur if you don't pay attention to in some accident harm, danger for injection molding machine in each operation, especially when the mould and mould clamping, today I to tell everyone about the safety of the injection molding machine operation. To avoid danger happening, the operator must pay attention to when operating the following safety issues: 1, keep the injection molding machine and their surroundings clean. Around 2, injection molding machine to be regularly cleaned sundries, and after oil or oil pressure, should wipe of the leaking oil as soon as possible. 3, the debris on the plastic tube ( For example, colloidal particles) The electric heating, which can be opened, cleaned up after so as not to fire. Or repair, if not necessary, not to tear down on the plastic tube of heat insulation shield. 4, check the operation, press the emergency button, or opening the safety door can terminate the clamping. 5, high-speed injection molding machine Taiwan moved forward, not from nozzle leakage by hand to clear out of the melt, so as not to put his hand in the middle of the machine and mold. 6, clean up the cylinder, the nozzle to the most appropriate temperature, high temperature keep the shoot the mouth open, and then use the lower of the glue cylinder pressure and velocity remove the rest of the rubber, cleaning not in direct contact with the hand just when the rubber injection, so as to avoid burns. 7, avoid left the heat-sensitive and corrosive plastic cylinder inside too long, supplier shall comply with the plastic of downtime and machine cleaning methods. Replace the plastic to make sure a mixture of old and new plastic won't produce chemical reaction, For example, POM and PVC mixed heating will produce gas, , otherwise should be cleaned with other plastic cylinder inside the old material. 8 before must check whether the mold, injection molding machine operation firmly installed on the injection molding machine dynamic templates and head plate. 9, pay attention to whether the ground of high-speed injection molding machine and other wiring connection safely. 10, do not cancel the security in order to improve the production speed or safety door switch. 11, when installing the mold rings must be completely screwing in mould lifting crane before. Mould should be installed according to the size of the mold adjustment of injection molding machine safety rod length, do security door is opened, the machine stop safely ( Mechanical lock) Down to stop the injection molding machine clamping. 12, in the process of normal injection molding production, it is strictly prohibited to the operator don't open the door, by the above or below take out the plastic injection molding machine. Repair mold or no production should be timely to turn off when the injection pump motor. 13, high-speed injection molding machine, the operation can be one operator, to allow multiple operations. Banned one operator control panel at the same time, another person to adjust mould and other operations.
Over the years, has become very popular as more and more people are trying it out.
More about the most suitable , visit FUHONG Injection Machine to get your offer!
FUHONG Injection Machine Co.,Ltd. will need to find one that fits our needs and budgets, and still turns out a quality product.
We create a group of experts to promote the quality standard and innovative technology of automatic injection moulding machine.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: